Module tour
R&S
®
TS-PMB
12
User Manual 1153.5233.12 ─ 06
4
Module tour
The R&S TS-PMB is designed as a long plug-in board for front mounting in the
R&S
TSVP base unit.
Figure 4-1: Overview of connectors and other elements
LEDs =
4.1
Status LEDs
The LEDs on the front indicate the current status of the module.
●
"PWR" (green LED)
Indicates that all necessary supply voltages are present.
●
"COM" (yellow LED)
Indicates data exchange via the interface.
●
"ERR" (red LED)
Indicates an error condition if illuminated.
4.2
Connectors X1 and X20
Type
: Control bus
Interface to connect the module to the control backplane of the base units.
Modules with version 3.x or higher are equipped with the X1 connnector, starting at
serial no. 100183 (first delivery in 2004).
Connectors X1 and X20
