Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 808 / 1088

Remote control commands
R&S
®
SMM100A
808 User Manual 1179.1341.02 ─ 05
Parameters:
<Phase> float
Range:
-180 to 180
Increment: 0.01
*RST:
90
Default unit: DEG
Example: see Example "Creating test signals" on page 796
Manual operation: See "Phase Offset Q" on page 158
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:SAMPles <Samples>
Sets the sample rate for the sine signal in samples per period.
The resulting clock rate must not exceed the maximum ARB clock rate (see data
sheet).
The maximum value is automatically restricted by reference to the set frequency and
has to fulfill the rule
Frequency * Samples <= ARB clock rate .
Parameters:
<Samples> integer
Range:
4 to 1000
*RST: 100
Example: see Example "Creating test signals" on page 796
Manual operation: See "Samples per Period" on page 157
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed <Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate:NAMed <Filename>
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate:NAMed <Filename>
Generates a signal and saves it to a waveform file.
Setting parameters:
<Filename> string
Example: See Example "Creating test signals" on page 796
Usage: Setting only
Manual operation: See "Generate Signal File" on page 158
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate
Generates a signal and uses it as output straight away.
Example: see Example "Creating test signals" on page 796
Usage: Event
SOURce subsystem