Getting started
R&S
®
SMM100A
70
User Manual 1179.1341.02 ─ 05
This block is the access point to the settings of:
●
The analog I/Q output signals
The generated signal can be output as single-ended or differential analog signal.
●
The analog I/Q impairments
3.4.9
RF and analog modulations ("RF" block)
The "RF" block represents the RF settings of the instrument.
This block is the access point to:
●
RF frequency and level settings, as well as the reference frequency, local oscillator,
user correction, etc.
●
The analog modulations
●
The list and sweep modes
3.4.10
Applications examples of the R&S
SMM100A
The R&S
SMM100A can be optimally adapted to the requirements of different applica-
tions:
●
Generation of digitally modulated signal
The main field of application of the R&S
SMM100A is the generation of digitally
modulated signals. The R&S
SMM100A generates a digitally modulated signal in
several ways: using the internal baseband generator, using the externally applied
digital baseband signals or in an analog wideband I/Q operation.
●
Generation of a wanted signal or an interfering signal for receiver tests
●
Generation of signals with up to 500 MHz signal bandwidth
3.5
Instrument control
This chapter provides an overview on how to work with the R&S
SMM100A.
It covers the following topics:
Possible ways to operate the instrument
................................................................ 71
...................................................................................71
Understanding the display information
....................................................................72
......................................................................................77
...................................................................................79
...................................................................................81
Instrument control