manualshive.com logo in svg

Rohde & Schwarz SMM100A, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMM100A Скачать руководство пользователя страница 79

Getting started

R&S

®

SMM100A

79

User Manual 1179.1341.02 ─ 05

For an overview of shortcuts supported by the R&S

 

SMM100A, see 

Chapter B,

"Unit shortcuts"

, 

on page 1038.

3. If the parameter does not require a unit, confirm the entered value by pressing

"Enter".

To enter values by using the front panel controls

1. Change the currently used parameter value by using the rotary knob or the [Up/

Down] keys.

2. If the parameter does not require a unit, confirm the entered value by pressing the

[Enter] key or any of the unit keys.
The instrument highlights the editing line to confirm the entry.

If you edit numeric data in tables, the entry field must be in edit mode: Press [Enter], or
the rotary knob to activate the edit mode.

3.5.5.2

 

Entering alphanumeric parameters

If a field requires alphanumeric input, you can use the on-screen keyboard to enter let-
ters and (special) characters.

3.5.5.3

 

Undo and redo actions

Accessed via the context-sensitive menus, "Undo" allows you to restore one or more
actions on the instrument. Depending on the available memory, the "Undo" steps can
restore all actions.

"Redo" restores a previously undone action.

3.5.6

 

Getting information and help

In some dialog boxes, graphics are included to explain the way a setting works.

For further information, you can use the following sources:

●

Tooltips give the value range of the parameter.

●

The context help provides functional description on a setting.

●

The general help explains a dialog box, provides instructions, and general informa-
tion.

To display context help

► To access a help topic, perform one of the following:

Instrument control

Содержание SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды