Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 497 / 1088

File and data management
R&S
®
SMM100A
497 User Manual 1179.1341.02 ─ 05
File Manager
Accesses the "File Manager" dialog, see Chapter 10.8, "Using the file manager" ,
on page 503.
10.4.2 How to save and recall instrument settings
Instrument settings can be saved to a file and loaded again later, so that you can
repeat the tests with the same settings.
To access and recall instrument setups quickly
► Assign the appropriate action to the [
★
(User)] key.
See Chapter 11.3.4, "How to assign actions to the [
★
(User)] key" , on page 547.
To save and recall instrument settings
1. Select Save/Rcl > "Operation Mode > Save".
2. Select "Save Immediate 1".
The instrument saves its settings in the intermediate memory 1. The filename and
the storage location cannot be changed.
3. Adapt the instrument settings as required. Select "Save Immediate 2"
4. To restore the settings, select the "Operation Mode > Recall"
5. Select "Recall Immediate 1"
The instrument is restored to the previous state.
6. Select "Recall Immediate 2" to switch to the settings saved in the second file.
To save complete instrument settings
1. Select Save/Rcl > "Operation Mode > Save".
2. In the file selection dialog, select a filename and storage location for the settings
file.
3. Select "Save".
A file with the defined name and path and the extension
*.savrcltxt
is created.
To restore instrument's configuration
Save the configuration as described in "To save complete instrument settings"
on page 497.
1. To restore settings, select Save/Rcl > "Operation Mode > Recall".
2. To retain the current frequency and level settings, enable "Save/Recall > Exclude
Frequency/Level"
Saving and recalling instrument settings