Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 301 / 1088

Configuring the RF signal
R&S
®
SMM100A
301 User Manual 1179.1341.02 ─ 05
In the "RF Level" dialog, you can configure the offset-free level, the level limit, and
the step width for varying the level with the rotary knob.
2. Select "User Variation" to set the step width to be used when setting the RF level
using the rotary knob.
The remote commands required to define the settings are described in Chap-
ter 13.16.16, "SOURce:POWer subsystem" , on page 934.
Settings
Amplitude .................................................................................................................... 301
Limit .............................................................................................................................302
Offset ...........................................................................................................................302
Digital Attenuation ....................................................................................................... 303
Setting Characteristics ................................................................................................ 303
Mode ........................................................................................................................... 304
Level Range ................................................................................................................ 304
Readjust ...................................................................................................................... 305
User Variation ..............................................................................................................305
└ Variation Active ............................................................................................. 305
└ Variation Step ................................................................................................305
Amplitude
Sets the level of the RF signal.
RF level settings