Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 1015 / 1088

Maintenance, storage and disposal
R&S
®
SMM100A
1015 User Manual 1179.1341.02 ─ 05
Settings:
Date ...........................................................................................................................1015
Time .......................................................................................................................... 1015
Timezone ...................................................................................................................1015
NTP Address .............................................................................................................1015
Use Time from NTP Server ....................................................................................... 1015
Date
Displays the date set in the operating system in the format [yyyy.mm.dd].
Remote command:
:SYSTem:DATE
on page 982
Time
Displays the time set in the operating system in the format [hh.mm.ss].
The time setting corresponds to the selected Use Time from NTP Server .
Remote command:
:SYSTem:TIME
on page 982
Timezone
Selects the timezone.
You can select the timezone according to the major cities on the respective continents.
Note: By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
Remote command:
:SYSTem:TIME:ZONE
on page 983
:SYSTem:TIME:ZONE:CATalog?
on page 983
NTP Address
Sets the IP address or host name of the NTP server.
NTP is a network time protocol used for synchronizing all participating devices in a
data network.
You can select a high-precision time server to reduce the impact of varying network
delays.
Remote command:
:SYSTem:NTP:HOSTname
on page 982
Use Time from NTP Server
Activates clock synchronization of the network via the NTP protocol.
Remote command:
:SYSTem:NTP:STATe
on page 982
Performing maintenance tasks