Rohde & Schwarz SMBVB-K362, Руководство пользователя

Страница: 14 / 28

Test configuration
R&S
®
SMBVB-K362, R&S
®
SMW-K362
14 User Manual 1178.9126.02 ─ 04
5 Test configuration
The property dialog box leads you to individual test configuration dialogs.
You can open the property dialog box from the "Testplan Details" subtab. Double-click
the node, for example . Or select the node and click "Properties ...".
The property dialog box lists global settings, test case-specific settings for all suppor-
ted GNSS test cases from test specifications, and advanced settings for non-conform-
ance settings.
"Set all to Default" resets all settings: global settings, the settings of all test cases, and
advanced settings.
Changing the default settings results in deviation from the recommendations of test
specifications. Any such change is indicated in the measurement report. Test specifica-
tion parameter values are always shown in SCPI report.
Use the navigation tree on the left, to open the corresponding configuration dialog. For
description, refer to the following sections.
● Connection setting .................................................................................................. 14
● Vehicle simulation setting ........................................................................................15
● GNSS simulation setting ......................................................................................... 16
● Signal power setting ................................................................................................17
● Test case setting ..................................................................................................... 18
● Advanced settings ...................................................................................................22
5.1 Connection setting
Specifies the data rate for NMEA stream transmitted by the GNSS generator.
Connection setting