
Remote Control Commands
R&S
®
SMBV100A
640
Operating Manual 1407.6062.32 ─ 08
[:SOURce<hw>]:IQ:SWAP[:STATe]
<State>
When set to ON, this command swaps the I and Q channel.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
OFF
Example:
IQ:SWAP ON
swaps the I and Q channel.
[:SOURce<hw>]:IQ:WBSTate
<Wbstate>
This command selects optimized setting for wideband modulation signals (>5 MHz)
(State ON).
Parameters:
<Wbstate>
0 | 1 | OFF | ON
*RST:
OFF
Example:
IQ:WBST ON
activates optimized setting for wideband signals.
7.14.10 SOURce:IQ:OUTput Subsystem
7.14.10.1
Analog I/Q Outputs
This subsystem contains the commands for configuring the differential output.
For information about the required options, see
chapter 5.6.3.2, "Analog I/Q Out-
.............................................640
..................................................................................641
..........................................................641
...............................................641
.................................................................................641
...........................................................642
...................................................................................642
[:SOURce<hw>]:IQ:OUTPut:BIAS:OPTimization[:RF]:STATe
<State>
This command activates/deactivates optimization of level accuracy and imbalance for RF
Output. Level accuracy and imbalance can be either optimized for RF output (active) or
for differential outputs (not active).
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
SOURce Subsystem
Содержание SMBV100A
Страница 31: ......
Страница 117: ...Manual Operation R S SMBV100A 100 Operating Manual 1407 6062 32 08 Legend of Front Panel Controls ...