Rohde & Schwarz SMBV-P101, Руководство пользователя

Страница: 32 / 131

GNSS Production Configuration and Settings
R&S
®
SMBV-P101
17 User Manual 1176.9787.02 ─ 05
4 GNSS Production Configuration and Set-
tings
The GNSS R&S SMBV procduction tester supports up to four satellite signals of the
standards GPS, Galileo, GLONASS and BeiDou. You can access the available satellite
settings via the baseband block.
For non-GNSS-related settings refer to the R&S SMBV operating manual.
See Chapter 2.3, "Description of the Non-GNSS-Related Settings" , on page 11.
● GNSS Main Dialog ..................................................................................................17
● Almanac Settings .................................................................................................... 24
● Time Conversion Configuration Settings .................................................................25
● Satellite Configuration Settings ...............................................................................27
● Navigation Message Configuration ......................................................................... 37
● Atmospheric Configuration Settings ........................................................................47
● Trigger/Marker/Clock Settings .................................................................................48
4.1 GNSS Main Dialog
To access the available satellite standards:
► Select "Baseband block > Satellite Navigation > GNSS Production...".
The dialog is split into several sections.
●
In the upper section, you can set the general parameters and activate the GNSS
production test signal, see
Chapter 4.1.1, "General Settings for GNSS Simulation" ,
on page 18.
●
The "Navigation Data" section comprises the navigation data source settings.
GNSS Main Dialog