Rohde & Schwarz RTP Скачать руководство пользователя страница 27

Страница: 27 / 83

Instrument tour

R&S

RTP

Getting Started 1337.9946.02 ─ 07

6 = Navigation controls
7 = External trigger input
8 = Vertical controls
9 = Input channels
10 = Two option slots for R&S

RTP-B1 (MSO) or R&S

RTP-B1E (for R&S

RT-ZVC) , R&S

RTP-

B6 (waveform generator), R&S

RTP-B7 (pulse source)

11 = USB connectors
12 = Connectors for probe compensation and grounding
13 = [Power] key

The keys and controls are described in

Chapter 5.3, "Keys and controls"

on page 32.

5.1.1

Connectors

Channel inputs and external trigger input

The R&S

RTP has four channel inputs to connect the input signals, and an exter-

nal trigger input to control the measurement by an external signal.
The input connectors are provided with a special Rohde

Schwarz active probe

interface, and they are BNC compatible. Thus, the instrument can automatically
detect active probes that have the Rohde

Schwarz probe interface.

The maximum input voltage on channel inputs and the external trigger input is
5

peak. The input impedance of the inputs is 50

USB

Two USB type A connectors that comply with standard USB 3.1 gen 1. They are
used to connect devices like keyboard, mouse and USB flash drive.

Note:

Electromagnetic interference (EMI) can affect the measurement results. To

avoid any impact, do not use USB connecting cables exceeding 1

Probe Compensation

Probe compensation terminal to support adjustment of passive probes to the
oscilloscope channel.

Protective earth conductor, 4 mm banana jack to connect
ground of DUT and test fixtures, and wrist strap.

Front panel

Содержание RTP




















































































Результаты поиска

Содержание RTP

Отзывы:

Rohde & Schwarz RTP, Начало работы, Страница: 27 / 83

Результаты поиска

Содержание RTP

Отзывы: