Rohde & Schwarz R&S ZN-Z3x, Руководство пользователя

Страница: 42 / 62

Operation
R&S
®
ZN-Z3x
42 User Manual 1177.6381.02 ─ 03
Parameters:
<ICU_ID> ID of a connected Inline Calibration Unit (see "ICU_ID"
on page 38)
Usage: Event
ICU:CAL:START <ICU_ID>
ICU:CAL:STOP <ICU_ID>
Starts/stops the calibration logic at the related Inline Calibration Unit (see
ICU:
SHOW:BUTton:STATE?
):
●
Issuing
ICU:CAL:START
in
"IDLE"
(or
"TRIGGERED"
) state puts the "Start
Cal" button of the related Inline Calibration Unit into
"ARMED"
state (LED
blinking)
●
Issuing
ICU:CAL:STOP
in
"TRIGGERED"
(or
"ARMED"
) state puts the "Start
Cal" button of the related Inline Calibration Unit into
"IDLE"
state
Parameters:
<ICU_ID> ID of a connected Inline Calibration Unit (see "ICU_ID"
on page 38)
Usage: Event
ICU:SHOW:BUTton:STATE? <ICU_ID>
Queries the state of the related Inline Calibration Unit's Start Cal button (see
"Start Cal" on page 14).
The following graphic shows the possible state transitions:
Remote Control Commands