Rohde & Schwarz R&S VENICE 2U, Руководство по оборудованию, Страница: 20 / 90

Overview
 Overview of the Front
2-6 VENICE 2U | Hardware Guide | Version 1.2
Rohde & Schwarz DVS GmbH
2.2 Overview of the Front
2.2.1 The Front of the System
This section provides an overview of the front of the system:
Figure 2-1: Overview of the front
The faceplate covers the fan area, the operation items in the middle of
the device and the hard disk array.
It is built with an integrated backlit R&S DVS logo which indicates the
state of the system, i.e. its power-on status: If the R&S DVS logo is illu-
minated, the power is turned on; if not, the power is turned off.
The bottom side of the faceplate is hinge-fastened, while its top side is
fixed with magnets. If you need access, for example to the operation
items, you just have to fold down the faceplate:
Figure 2-2: Opening the faceplate
Then you can access the operation items (see section “Operation
Items” on page 2-8), the fans of the fan area (see section “Fan Area” on
page 2-11) and the hard disks of the hard disk array (see section “Hard
Disk Array” on page 2-9).
Once the faceplate is folded down (see section “The Front of the Sys-
tem” on page 2-6), you have access to the uncovered front of the sys-
tem:
The faceplate can be removed for transport reasons (see section “Re-
moval of the Faceplate” on page 5-14).
backlit R&S DVS logo faceplate