manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 84 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 84

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

84

User Manual 1178.5689.02 ─ 06

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:LHANdling

Outgoing Message Handling

Selects whether the message text is defined via the GUI or read from a file.

"Use Internal"

Use the message text configured via the GUI (

Outgoing SMS

 or 

Out-

going SMS binary

).

"From File"

Read the text from the file selected via 

"From File"

 

on page 86.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:MESHandling

Outgoing SMS

Defines the message contents for outgoing 7-bit ASCII messages. Up to 800 charac-
ters are allowed.

This text is used for "Outgoing Message Handling" = "Use Internal" plus "Data Coding /
Character Set" = "7bit".

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:INTernal

Outgoing SMS binary

Defines the message contents for outgoing 8-bit binary messages. The contents are
entered as hexadecimal numbers. Up to 1400 digits are allowed.

This text is used for "Outgoing Message Handling" = "Use Internal" plus "Data Coding /
Character Set" = "8bit".

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:BINary

Protocol Identifier

Specifies the TP protocol identifier (TP-PID) value to be sent. The meaning of the val-
ues is defined in 3GPP TS 23.040 chapter 9.2.3.9.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:PIDentifier

Data Coding / Character Set

Selects between the 7-bit ASCII message (

"Outgoing SMS"

 

on page 84) and the 8-bit

binary message (

"Outgoing SMS binary"

 

on page 84).

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:DCODing

User Data Header

To add a header to the TP user data field, enable the checkbox and configure the
header via the hex value. The structure of the user data header is defined in 3GPP TS
23.040, chapter 9.2.3.24.

The hex value configures the following parts of the header:

●

Information element identifier (IEI, one octet)
Currently supported values: #H05, #H70 to #H7F

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов