manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 61 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 61

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

61

User Manual 1178.5689.02 ─ 06

In-Band PCI

Only for the in-band operation mode. Selects whether the NB-IoT cell uses the same
physical cell ID as the LTE cell.

The UE is informed about this setting via the "operationModeInfo" in the MIB.

"Same PCI"

Signaling value "Inband-SamePCI". The NB-IoT cell and the LTE cell
share a physical cell ID. The UE can use the LTE cell-specific refer-
ence signal (CRS).

"Different PCI"

Signaling value "Inband-DifferentPCI". The NB-IoT cell and the LTE
cell have different physical cell IDs. The UE must use the narrowband
reference signal (NRS).

Remote command: 

CONFigure:NIOT:SIGN<i>:CELL:IBGBand:IPCI

In-Band Carrier Position

Only for the in-band operation mode. Specifies the number of the LTE resource block
at the NB-IoT carrier position.

Modifying the "In-Band Carrier Position" shifts the LTE channel relative to the NB-IoT
carrier frequency, configured via the RF settings, see 

Chapter 2.3.5.2, "RF Frequency"

,

on page 47.

Only certain values are allowed, depending on the cell bandwidth, see 

Table 2-2

.

Remote command: 

CONFigure:NIOT:SIGN<i>:CELL:IBGBand:IBCPosition

Guard-Band Carrier Position

Only for the guard-band operation mode. Defines whether the NB-IoT carrier is located
in the lower guard band or in the upper guard band of an LTE channel.

The NB-IoT carrier frequency is configured via the RF settings, see 

Chapter 2.3.5.2,

"RF Frequency"

, 

on page 47.

Modifying the "Guard-Band Carrier Position" shifts the LTE channel relative to the NB-
IoT carrier.

For frequency and channel raster offsets, refer to 

Chapter 2.2.5.2, "Guard-Band Oper-

ation"

, 

on page 18.

Remote command: 

CONFigure:NIOT:SIGN<i>:CELL:IBGBand:GBCPosition

LTE Frequency

Displays the center frequency of the generated LTE cell signal. The frequency is calcu-
lated from the NB-IoT RF frequency, the LTE cell bandwidth and the setting "In-Band
Carrier Position" or "Guard-Band Carrier Position".

For the standalone mode, no LTE cell signal is generated.

Remote command: 

SENSe:NIOT:SIGN<i>:CELL:IBGBand:FREQuency:DL?
SENSe:NIOT:SIGN<i>:CELL:IBGBand:FREQuency:UL?

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов