Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 148 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
148 User Manual 1178.5689.02 ─ 06
Parameters:
<InbandPCI> SAME | DIFF
SAME : "Inband-SamePCI"
DIFF : "Inband-DifferentPCI"
*RST: SAME
Example: See Configuring Physical Cell Setup
Firmware/Software: V3.7.30
Manual operation: See "In-Band PCI" on page 61
CONFigure:NIOT:SIGN<i>:CELL:IBGBand:IBCPosition <IBCarrPos>
Specifies the number of the LTE RB at the NB-IoT channel position, for the in-band
operation mode.
Only specific values within the stated range are allowed, depending on the LTE chan-
nel BW, see
Table 2-2 .
Parameters:
<IBCarrPos> Range: 2 to 95
*RST: 4
Example: See Configuring Physical Cell Setup
Firmware/Software: V3.7.30
Manual operation: See "In-Band Carrier Position" on page 61
CONFigure:NIOT:SIGN<i>:CELL:IBGBand:GBCPosition <GBCarrPos>
Selects the upper or lower guard band for guard-band operation mode.
Parameters:
<GBCarrPos> UP | LOW
*RST:
UP
Example: See Configuring Physical Cell Setup
Firmware/Software: V3.7.30
Manual operation: See "Guard-Band Carrier Position" on page 61
SENSe:NIOT:SIGN<i>:CELL:IBGBand:FREQuency:DL?
SENSe:NIOT:SIGN<i>:CELL:IBGBand:FREQuency:UL?
Query the DL and UL LTE carrier center frequencies resulting from the in-band mode
or guard-band mode settings.
Return values:
<Frequency> Default unit: Hz
Example: See Configuring Physical Cell Setup
Command Reference
深圳德标仪器
135-1095-0799