Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 275 / 388

NB-IoT Multi-Evaluation Measurement
R&S
®
CMW-KM300/-KS300
275 User Manual 1178.5689.02 ─ 06
Parameters:
<NPUSChFormat> F1 | F2
*RST:
F1
Example: See Specifying Required Settings
Firmware/Software: V3.5.10
Manual operation: See "NPUSCH Format" on page 232
CONFigure:NIOT:MEAS<i>:MEValuation:SUBCarrier <NofSubCarrier>, <Offset>
Specifies the subcarrier configuration of the allocated resource units.
For the combined signal path scenario, use the uplink scheduling commands of the
signaling application.
Parameters:
<NofSubCarrier> 1 | 3 | 6 | 12
Number of subcarriers per resource unit
The allowed values have dependencies, see
Chapter 3.2.6.2,
"Resource Unit Allocation" , on page 209.
*RST: 1
<Offset> Offset of the first allocated subcarrier from the edge of the trans-
mission bandwidth
For a subcarrier spacing of 3.75 kHz / 15 kHz, n equals 48 / 12.
Range:
0 to n - <NofSubCarrier>
*RST: 0
Example: See Specifying Required Settings
Firmware/Software: V3.5.10
Manual operation: See "No. of Subcarriers, Start Subcarrier" on page 233
CONFigure:NIOT:MEAS<i>:MEValuation:NRUNits <NofRU>
Specifies the number of resource units allocated for the NPUSCH.
For the combined signal path scenario, use the uplink scheduling commands of the
signaling application.
Parameters:
<NofRU> NRU01 | NRU02 | NRU03 | NRU04 | NRU05 | NRU06 | NRU08 |
NRU10
*RST:
NRU01
Example: See Specifying Required Settings
Firmware/Software: V3.5.10
Manual operation: See "No. of Resource Units" on page 233
Command Reference
深圳德标仪器
135-1095-0799