manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 246 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 246

NB-IoT Multi-Evaluation Measurement

R&S

®

CMW-KM300/-KS300

246

User Manual 1178.5689.02 ─ 06

3.3.7

 

Shortcut Configuration

Access: "Config" hotkey > "Generator Shortcut" setting.

This section configures a shortcut softkey that provides a fast way to access the GPRF
generator from the measurement.

The setting is a common measurement setting. It has the same value in all NB-IoT
measurements (NPRACH measurement and multi-evaluation measurement).

Figure 3-30: Shortcut configuration

Generator Shortcut

Selects a GPRF generator instance. Softkeys for the selected instance are added to
the softkey panel.

3.3.8

 

Additional Softkeys and Hotkeys

The measurement provides some softkey/hotkey combinations which have no equiva-
lent in the configuration dialog. Most of these hotkeys provide display configurations
(like diagram scaling). They are self-explanatory and do not have any remote-control
commands assigned.

The remaining softkeys > hotkeys are described below.

The softkeys "Signaling Parameter" and "NB-IoT Signaling" are displayed only if the
combined signal path scenario is active and are provided by the "NB-IoT Signaling"
application selected as master application. See also 

"Scenario = Combined Signal

Path"

 

on page 226.

The softkeys "ARB / List Mode" and "GPRF Generator" are displayed only if the stand-
alone scenario is active and the generator shortcut is enabled, see 

Chapter 3.3.7,

"Shortcut Configuration"

, 

on page 246.

While one of the signaling or generator softkeys is selected, the "Config" hotkey opens
the configuration dialog of the generator or signaling application, not the configuration
dialog of the measurement.

Multi Evaluation, NPRACH > Assign Views

Selects the view types to be displayed in the overview. The R&S

 

CMW does not evalu-

ate the results for disabled views. Therefore, limiting the number of assigned views can
speed up the measurement.

Remote command: 

CONFigure:NIOT:MEAS<i>:MEValuation:RESult[:ALL]
CONFigure:NIOT:MEAS<i>:MEValuation:RESult:PDYNamics

 etc.

CONFigure:NIOT:MEAS<i>:PRACh:RESult[:ALL]
CONFigure:NIOT:MEAS<i>:PRACh:RESult:PVPReamble

 etc.

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов