Rohde & Schwarz NRP18A, Руководство пользователя

Страница: 69 / 165

Remote Control Commands
R&S
®
NRPxxA(N)
69 User Manual 1177.6017.02 ─ 05
Example: *TST?
Query
1
Response: Failed
Usage: Query only
*WAI
WAIt to continue
Prevents the execution of the subsequent commands until all preceding commands
have been executed and all signals have settled.
Usage: Event
9.4 Preparing for the Measurement
Before starting a measurement, you need to do the following:
● Selecting the Reference Source ............................................................................. 69
● Selecting a Measurement Path ...............................................................................69
● Selecting a Measurement Mode ............................................................................. 70
9.4.1 Selecting the Reference Source
The
ROSCillator
subsystem contains commands for configuring the reference
source.
[SENSe<Sensor>:]ROSCillator:SOURce <source>
Sets the source of the reference oscillator. Refers typically to a precision, stabilized
time base.
Parameters:
<source> INTernal | EXTernal | HOST
INTernal
Internal precision oscillator
EXTernal | HOST
External signal supplied at the host interface connector.
*RST:
INTernal
Example: ROSC:SOUR INT
9.4.2 Selecting a Measurement Path
The
RANGe
subsystem contains commands for selection of a measurement path.
Preparing for the Measurement