Rohde & Schwarz NG-B105, Руководство пользователя

Страница: 53 / 201

Instrument functions
R&S
®
NGP800
53 User Manual 5601.5610.02 ─ 09
Slew rate control
●
The slew rate control does not affect the output turn-on slew rate programmed via
the
EasyRamp function.
●
The slew rate control mode is not compatible with Analog Input and QiuckArb func-
tions. The reduce slew rate function is automatically disable if any of these func-
tions is used and vice versa.
●
The minimum setting voltage is 0.003 V if "Reduce Slew Rate" is activated, e.g.
output voltage is automatically set to 0.003 V if setting value is < 0.003 V.
► Select "Reduce Slew Rate" menu item to activate the slew rate control.
The R&S NGP800 activates the slew rate control.
6.3 Analog input
Instrument option
R&S NGP-K107 (P/N: 5601.6200.03) option is required for the "Analog Input".
Analog input
If "Analog Input" of a selected channel (voltage or current) is enabled, the respective
channel voltage or current setting is disabled.
See
Chapter 6.1, "Setting the channels voltage and current" , on page 47.
With "Analog Input", you can regulate the channel output (voltage or current) settings
with an input voltage of 0 V to 5 V.
Analog input mode NGP output for 64 V channels NGP output for 32 V chan-
nels
Voltage mode 0 V to 64 V 0 V to 32 V
Current mode 0 A to 10 A 0 A to 20 A
1. Press [Settings] key.
The R&S NGP800 displays the device/channel menu window.
2. Select the required channel tab to configure the analog input mode.
The R&S NGP800 displays the selected channel menu.
3. Select "Analog Input" from the menu.
The R&S NGP800 displays the selected "Analog Input" dialog.
Analog input