Subject to change without notice
P r o b e H Z O 3 0
About the Probe HZO30
HAMEG Instruments GmbH presents a unique
Inline Probing System – the
HZO30 active probe
which can contact adjacent square pins in 2.54
mm pitch simultaneously. The probe‘s housing is
T-shaped so that many probes can be positioned
next to each other in a never ending chain.
Like this a number of measurements can be per-
formed at the same time. The
HZO30 active probe
is system-independant and its standard BNC
connector can be plugged onto any measuring
instrument with a 50Ω input.
With an input resistance of 1 MΩ and an input
capacitance of 0.9 pF the
HZO30 active probe
is suitable for measurements in all frequency
ranges. Compared to passive probes the
HZO30
active probe
offers a high input impedance into
the GHz-range. Passive probes with their relative
high input capacitance load the signal source
already at frequencies above 100 kHz.
That´s why the
HZO30 active probe
with its high
input resistance and its low input capacitance is
the ideal probe for most of your daily measur-
ments.
The HZO30 testing adjacent pins in 2.54 mm Pitch
Included in delivery
The following items are included in the scope of
delivery. Please check the delivery for comple-
teness. If any item is missing, send a message to
our service department and we will send you this
item immediately.
Item
Qty
Instruction Manual
1
Spring Tip 0.5 mm
1
Solid Tip 0.5 mm
1
Ground Blade
1
Marker Bands 4 colors
1
L-In Adapter
1
Ground Lead 6 cm
1
Ground Lead 12 cm
1
Ground Lead 90° 5cm
1
Ground Lead 90° 10cm
1
Power Supply
1
PicohookTM black
1
PicohookTM red
1
Protection Cap 2.5
1
self adhesive Cu Pad (2 x 2 cm)
2
Probe
1
Y-Lead Adapter to 0.8mm sockets
1
Z-Ground
1
Use ground lead only for connections to
earth ground
The accessories provided with the probe
have been safety tested. Do not use any
other accessories than those “originally”
provided.
