Rohde & Schwarz Hameg HMP4030 Скачать руководство пользователя | Manualshive

Страница: 25 / 50

background image

Preparing for Use

R&S

®

HMP Series

10

Getting Started 1178.6791.02 ─ 02

Risk of injury due to disregarding safety information

Observe the information on appropriate operating conditions provided in the
data sheet to prevent personal injury or damage to the instrument. Read
and observe the basic safety instructions provided with the instrument, in
addition to the safety instructions in the following sections. In particular:

●

Do not open the instrument casing.

●

Operate the instrument in the positions specified by the manufacturer
without obstructing the ventilation of the product.

If the manufacturer's specifications are not observed, electric shock, fire,
and / or serious injury, and even death can occur.

Risk of instrument damage due to inappropriate operating conditions

Specific operating conditions are required to ensure accurate measure-
ments and to avoid damage to the instrument. Observe the information on
appropriate operating conditions provided in the basic safety instructions
and the instrument's data sheet.

Risk of interference by electrostatic discharge

When the front and rear connectors are connected simultaneously, interfer-
ences due to electrostatic discharge can occur. To prevent interferences,
leave the output sockets at the front disconnected, when using the rear
panel outputs.

Putting into Operation

«
...
23
24
25
26
27
...
»

Содержание Hameg HMP4030



















































Отзывы:

Нет отзывов

Похожие инструкции для Hameg HMP4030

Бренд: Fein Страницы: 148

Бренд: National Flooring Equipment Страницы: 28

Бренд: Pattfield Ergo Tools Страницы: 238

Бренд: Gude Страницы: 20

Бренд: Larzep Страницы: 8

Бренд: Hilti Страницы: 5

GENESYS GEN 2400W Series

Бренд: TDK-Lambda Страницы: 88

Бренд: Fastorq Страницы: 6

Бренд: Varan Страницы: 11

Бренд: Velleman Страницы: 45

Бренд: Inder Страницы: 2

Бренд: REED Страницы: 2

XPower Powerpack 400 R

Бренд: Xantrex Страницы: 74

Бренд: Keysight Technologies Страницы: 128

Бренд: Maddox Страницы: 8

Бренд: Fein Страницы: 17

HWS-L/BAT Series

Бренд: TDK-Lambda Страницы: 20

TruTool TKF 1500 3A1

Бренд: Trumpf Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды