Rohde & Schwarz FSW13, Руководство пользователя

Страница: 1053 / 1150

Remote Commands
R&S
®
FSW
1053 User Manual 1173.9411.02 ─ 19
This command is only available if a HP language is selected using
SYSTem:
​
LANGuage
​
on page 1050
Parameters:
<State> ON | OFF
*RST:
OFF
Example: SYSTem:RSW ON
Manual operation: See "Sweep Repeat" on page 654
11.13.2 Reference: GPIB Commands of Emulated HP Models
The R&S FSW analyzer family supports a subset of the GPIB commands of HP mod-
els 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A, 8566B, 8568A, 8568B and
8594E.
Despite the differences in system architecture and device features, the supported com-
mands have been implemented in a way to ensure a sufficiently high degree of corre-
spondence with the original.
This includes the support of syntax rules for not only newer device families (B and E
models) but for the previous A family as well.
In many cases the selection of commands supported by the R&S FSW is sufficient to
run an existing GPIB program without adaptation.
After the introduction, this section includes the following topics:
● Command Set of Models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
...................................1053
● Special Features of the Syntax Parsing Algorithms for 8566A and 8568A Models
............................................................................................................................ 1077
● Special Behavior of Commands ..........................................................................1078
● Model-Dependent Default Settings ..................................................................... 1079
● Data Output Formats ...........................................................................................1080
● Trace Data Output Formats ................................................................................ 1080
● Trace Data Input Formats ................................................................................... 1080
● GPIB Status Reporting ........................................................................................1080
11.13.2.1 Command Set of Models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
As with the original units, the R&S FSW includes the command set of the A models in
the command set of the B models.
The HP model 8591E is compatible to HP model 8594E, the HP models 71100C,
71200C, and 71209A are compatible to HP models 8566A/B.
Emulating Other Instruments' Commands