Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 999 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
999 User Manual 1178.8520.02 ─ 08
Frequency and level of the first harmonic are determined and used for the mea-
surement list.
●
Time domain (span = 0)
The level of the first harmonic is determined. The frequency remains unchanged.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Adjust Settings" on page 309
12.5.10.3 Performing the measurement
The following commands are required to perform a harmonic distortion measurement:
INITiate<n>[:IMMediate]
on page 861, see Chapter 12.5.1, "Performing mea-
surements" , on page 859
12.5.10.4 Retrieving results
The following commands retrieve the results of the harmonic distortion measurement.
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:DISTortion?
........................................ 999
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:LIST
...................................................999
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:DISTortion?
This command queries the total harmonic distortion of the signal.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 860.
Suffix:
<n>
.
Window
<m> Marker
Query parameters:
<Result> TOTal
Return values:
<DistortionPct>
<DistortionDb>
Usage: Query only
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:LIST
This command queries the position of the harmonics.
Configuring and performing measurements