Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1373 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1373 User Manual 1178.8520.02 ─ 08
<ChannelName> String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
12.12 Commands for remote instrument operation
The following commands are required to shutdown or reboot the R&S FSV/A from a
remote PC.
SYSTem:CLOGging
..................................................................................................... 1373
SYSTem:REBoot
..........................................................................................................1373
SYSTem:SHUTdown
.................................................................................................... 1373
SYSTem:CLOGging <State>
This command turns logging of remote commands on and off.
Parameters:
<State> ON | OFF | 1 | 0
ON | 1
Writes all remote commands that have been sent to a file.
The destination is
C:\R_S\INSTR\ScpiLogging\
ScpiLog.<no.>
.
where <no.> is a sequential number
A new log file is started each time logging was stopped and is
restarted.
OFF | 0
*RST: 0
Manual operation: See "I/O Logging" on page 809
SYSTem:REBoot
This command reboots the instrument, including the operating system.
SYSTem:SHUTdown
This command shuts down the instrument.
12.13 Emulating other instruments' commands
The R&S FSV/A analyzer family supports a subset of the GPIB commands of several
HP and PSA instruments.
For details see Chapter 11.3, "GPIB languages" , on page 790.
Emulating other instruments' commands