Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1009 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1009 User Manual 1178.8520.02 ─ 08
<m> irrelevant
Parameters:
<Time> Range: 100 us to 100 s
*RST: 1 s
Default unit: s
Manual operation: See "Dwell Time" on page 341
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:X:SPACing <Scale>
This command selects the scaling of the x-axis.
Suffix:
<n>
.
Window
<w> subwindow
<t>
Parameters:
<Scale> LOGarithmic
Logarithmic scaling.
LINear
Linear scaling.
*RST:
LINear
Example: DISP:TRAC:X:SPAC LOG
Manual operation: See "Frequency Axis Scaling" on page 342
12.5.13.4 Configuring EMI limit lines
The commands required to define limit lines for EMI measurements are described in
Chapter 12.8.4, "Configuring display lines" , on page 1230.
12.5.13.5 Controlling LISN
The commands required to control a LISN are described here.
INPut<ip>:LISN:FILTer:HPASs[:STATe]
...........................................................................1009
INPut<ip>:LISN:PHASe
................................................................................................ 1010
INPut<ip>:LISN[:TYPE]
.................................................................................................1010
INPut<ip>:LISN:FILTer:HPASs[:STATe] <State>
This command turns the 150 kHz highpass filter for the ENV216 network on and off.
Configuring and performing measurements