Rohde & Schwarz FPL1000 Series, Руководство пользователя

Страница: 528 / 899

Remote Commands
R&S
®
FPL1000
528 User Manual 1178.3370.02 ─ 03
<ChannelType> Channel type of the new channel setup.
For a list of available channel setup types see
INSTrument:
LIST?
on page 528.
<ChannelName2> String containing the name of the new channel setup.
Note: If the specified name for a new channel setup already
exists, the default name, extended by a sequential number, is
used for the new channel setup (see
INSTrument:LIST?
on page 528).
Usage: Setting only
Manual operation: See " Replace Current Channel Setup " on page 85
INSTrument:DELete <ChannelName>
This command deletes a channel setup.
Parameters:
<ChannelName> String containing the name of the channel setup you want to
delete.
A channel setup must exist in order to be able delete it.
Usage: Event
Manual operation: See "Closing a channel setup" on page 85
INSTrument:LIST?
This command queries all active channel setups. This is useful in order to obtain the
names of the existing channel setups, which are required in order to replace or delete
the channel setups.
Return values:
<ChannelType>,
<ChannelName> For each channel setup, the command returns the channel setup
type and channel setup name (see tables below).
Tip: to change the channel setup name, use the
INSTrument:
REName
command.
Example: INST:LIST?
Result for 3 channel setups:
'ADEM','Analog Demod','IQ','IQ
Analyzer','IQ','IQ Analyzer2'
Usage: Query only
Manual operation: See "Changing the Channel Setup Name" on page 66
Selecting the Operating Mode and Application