Rohde & Schwarz FPC Series, Руководство пользователя

Страница: 383 / 419

Function Reference
R&S
®
FPC
380 User Manual 1178.4130.02 ─ 07
Log Scale
See "Selecting the scale of the x-axis" on page 141.
Remote command:
[SENSe:]SWEep:SPACing
on page 298
20.5.3 Amplitude Menu
Access : [Ampt]
Reference Level .......................................................................................................... 380
Range / Ref Position ................................................................................................... 380
Auto Range ................................................................................................................. 380
Unit ..............................................................................................................................381
Preamplifier ................................................................................................................. 381
Attenuator ....................................................................................................................381
Impedance .................................................................................................................. 381
Transducer .................................................................................................................. 381
Reference Level
See "Defining a reference level" on page 99.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel
on page 253
Range / Ref Position
Bargraph:
●
"Defining the bargraph scale" on page 142
Frequency scan:
●
"Defining a display range" on page 104
●
"Defining the position of the reference level" on page 100
●
"Defining a reference offset" on page 100
Remote command:
Scale (y-axis):
DISPlay<n>[:WINDow]:TRACe<t>:Y:SPACing
on page 252
Range (y-axis):
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]
on page 252
Range (automatic):
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:ADJust
on page 253
Reference position:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RPOSition
on page 254
Reference offset:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel:
OFFSet
on page 254
Auto Range
Bargraph: "Defining the bargraph scale" on page 142
Frequency scan: "Defining a display range" on page 104.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:ADJust
on page 253
Function Reference: Receiver Application