Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 297 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
282 User Manual 1409.5570.32 ─ 05
Usage: Event
Manual operation: See "Arm" on page 120
[:SOURce<hw>]:EBOX:USER:TRIGger:CSTat?
Queries the current trigger status.
Return values:
<Status> string
Example: EBOX:USER:TRIG:CSTAT?
Response:
Idle
, i.e. triggering is waiting for a trigger event.
Usage: Query only
[:SOURce<hw>]:EBOX:USER:TRIGger:DELay <Delay>
Specifies a time delay after the trigger event. Trigger delay is defined in clock cycles
Parameters:
<Delay> float
Example: EBOX:USER:TRIG:DEL 5
Signal output starts 5 clock cycles after the trigger event.
Manual operation: See "Trigger Delay" on page 120
[:SOURce<hw>]:EBOX:USER:TRIGger:RESTart
Starts triggering again.
Example: EBOX:USER:TRIG:REST
restarts triggering.
Usage: Event
[:SOURce<hw>]:EBOX:USER:TRIGger:SOURce <Source>
Selects the trigger source. The trigger signal starts the signal output at the user interface.
Parameters:
<Source> AUTO | SYNC
AUTO
Outputs the signal immediately.
SYNC
Synchronizes signal output with an incoming trigger signal, i.e. the
DUT triggers data output to the R&S
EX-IQ-BOX. The trigger sig-
nal is applied at the SYNC IN pin of the user interface.
*RST:
AUTO
Example: EBOX:USER:TRIG:SOUR SYNC
uses a trigger signal from the DUT to synchronize signal output.
User Defined - Remote Control Commands