Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 141 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
126 User Manual 1409.5570.32 ─ 05
Chip Select
Activates using the SSI-SPI chip.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SSI:
​
SPI:
​
CSELect
​
on page 285
Write Byte (hex)
Writes the SSI:SPI byte in hexadecimal format.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SSI:
​
SPI:
​
WBYTe
​
on page 286
Read Byte (hex)
Indicatess the SSI:SPI byte in hexadecimal format.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SSI:
​
SPI:
​
RBYTe?
​
on page 286
Select File
Selects a SSI:SPI file.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
SSI:
​
SPI:
​
FSELect
​
on page 285
Send
Send all parameters of the configuration dialog to the R&S EX-IQ-BOX.
7.2 CPRI
This CPRI documentation contains a general overview of the standard interface. The
main part explains the configuration dialogs and parameters in detail, provided by the
configuration software R&S
DigIConf. Find the appropriate information in
​
chapter 7.2.6,
"Main Configuration Dialog" , on page 150,
​
chapter 7.2.7, "Hardware" , on page 153,
​
chapter 7.2.8, "L1 Analysis" , on page 163,
​
chapter 7.2.9, "Downlink and Uplink" ,
on page 170,
​
chapter 7.2.10, "Control & Management" , on page 193,
​
chapter 7.2.11,
"Vendor Data" , on page 200, and
​
chapter 7.2.12, "Diagnostics" , on page 203.
You also find a panel
​
chapter 7.2.13, "ARB" , on page 205 in the CPRI configuration
dialog. If the R&S EX-IQ-BOX is equipped with a special option for waveform memory, it
supports playback of waveform signals. I.e. the R&S EX-IQ-BOX can work as a signal
source without any generator connected.
In addition, an application example of a CPRI RE ( R adio E quipment) test application
exemplifies the necessary equipment, test construction and essential settings. Refer to
​
chapter 7.2.5, "Start with CPRI - Setup Example" , on page 143 for information on this
application example.
CPRI parameter settings are set by means of the configurator software R&S DigIConf.
See
​
chapter 6.1, "R&S DigIConf Configuration Software" , on page 53 for description of
R&S DigIConf in detail.
CPRI