Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 215 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
200 User Manual 1409.5570.32 ─ 05
Login / Password
If a specific user name and password are requested for login, enter the user name in this
field, and the password in the field right beside.
Note: This functionality refers to the integrated telnet client and applies only to CPRI RE
test mode.
Connect
Set up the Telnet connection. On the right of the connect button, R&S DigIConf indicates
the current status of the connection.
Note: This functionality refers to the integrated telnet client and applies only to CPRI RE
test mode.
Input Window, Command line, Execute
The lower part of the fast C&M tab provides an entry field to enter control commands
manually. The commands are displayed in the input window above. EXECUTE executes
the command, or the command sequence.
Note: This functionality refers to the integrated telnet client and applies only to CPRI RE
test mode.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
ETH:
​
COMMand
​
on page 292
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
CM:
​
ETH:
​
EXECute
​
on page 292
Clear
Erases the entries and the input window.
Remote command:
n.a.
Logout
Logs off the session.
Remote command:
n.a.
7.2.11 Vendor Data
The Vendor Data tab provides the input of user-specific information, like for example
additional control data. The R&S EX-IQ-BOX then transmits the data embedded in the
CPRI protocol.
CPRI