Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 130 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
115 User Manual 1409.5570.32 ─ 05
Example:
Strobe Position = 2, Strobe Polarity = Positive.
Fig. 7-29: User defined > Strobe position 2: I/Q OUT serial, negative polarity
word size = 16
bit order = LSB
strobe polarity = negative
strobe position = 2
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
USER:
​
DATA:
​
SPOSition
​
on page 276
7.1.5 Clock
The "Clock" tab provides the frequency settings for synchronizing the test setup with
either external or internal clock source.
Fig. 7-30: User defined > Clock dialog
The graphic in the clock dialog of the generators and in R&S DigIConf indicates the data
flow, the clock signal and the reference frequency signal. A signal diagram displays
schematically the current type of data transmission.
Clock Rate
Sets the clock rate (frequency) for signal transmission between the R&S EX-IQ-BOX and
the external device (DUT). Depending on the logic type and the clock source the clock
rate range varies, as shown below.
User Defined