Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 102 / 418

R&S EX-IQ-BOX Configuration
R&S
®
EX-IQ-BOX
87 User Manual 1409.5570.32 ─ 05
Fig. 6-17: R&S EX-IQ-BOX button in a signal generators digital input / output settings dialogs
–
The ID (serial number) of the connected R&S EX-IQ-BOX is shown in the "Con-
nected Device" information field.
If you unplug the R&S EX-IQ-BOX, the generator changes its display accordingly:
●
Symbol in the block diagram
The instrument automatically closes the associated active R&S
EX-IQ-BOX dialogs
and shows the common symbol "DIG I/Q IN" or "DIG I/Q OUT".
Fig. 6-18: R&S signal generator standard symbol of the digital interface.
6.2.1.3 Dialogs
The R&S EX-IQ-BOX settings are accessed via the main settings dialogs "Baseband
Input Settings" or "Digital I/Q Output Settings" of the associated function block.
●
The setting parameters for the R&S EX-IQ-BOX are identical for baseband input and
output, but there is a separate dialog for each direction, indicated in the header.
●
In the remote control signal direction is determined in the command syntax.
●
The parameters are described in
​
chapter 7.1, "User Defined" , on page 95 and the
remote control commands in
​
chapter 9.3, "User Defined - Remote Control Com-
mands" , on page 257 .
1. To access the settings dialog, click "Config..." of the corresponding block and select
the associated settings entry in the menu list.
Fig. 6-19: Digital input / output menus of signal generators
Either the dialog "Baseband Input Settings" or "Digital I/Q Output Settings" opens.
Configuration via R&S Instruments