Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 375 / 418

Remote Commands
R&S
®
EVSG1000
375 User Manual 1178.6227.02 ─ 06
GETLISTDATA <ListNo>
This command queries the contents of the selected list.
Setting parameters:
<ListNo> list number
Range:
1 to 9999
Return values:
<ListData> Contents of the list.
<EventResult> READY.
The command was executed successfully.
ERROR
An error occurred; command was not successful.
GETLISTSIZE
This command queries the size of the active list.
Return values:
<NoEntries> integer
Number of entries in the active list.
Range:
0 to 1 000 000
CLEARALLLISTS
This command clears all 999 lists. All entries are deleted in all lists.
Return values:
<EventResult> READY
Command was executed successfully
ERROR
An error occurred; command was not successful
Manual operation: See "Clear All Lists" on page 221
RECIQ <State>
If enabled, the raw, unprocessed I/Q data is also recorded when you execute
DL_START
. This feature requires the R&S EVSG1-K25 option. I/Q data is available in
ILS, VOR, MB, COM, and GBAS mode.
I/Q data is stored as a separate file with the same file name as the data list, but the
extension
.iq
.
For details see Chapter 8.2.2, "I/Q Data Recording and Streaming (R&S EVSG1-K25)" ,
on page 218.
Data Management