Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 17 / 418

Getting Started
R&S
®
EVSG1000
17 User Manual 1178.6227.02 ─ 06
Connecting headphones
Take the following measures to prevent hearing damage. Before using headphones,
check the volume and reduce it if necessary. If you monitor varying signal levels, take
off the headphones and wait until the signal has settled. Then adjust the volume.
Using laser products
Warning: laser beam
The product contains a laser.
Avoid exposure to direct or reflected laser beam.
Lasers are classified according to their potential risk.
Class 1M lasers
Safe for the naked eye. If you look into the laser beam with optical instruments such as
binoculars or eye loupes, you risk damaging your eyes.
Class 2 lasers
If you stare into the beam, you risk damaging your eyes.
1.1.2 Labels on the Product
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 15
●
Product and environment safety, see Table 1-1
Table 1-1: Labels regarding product and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life.
For more information, see "Electrical and electronic equipment" on page 390.
For more information, see the R&S EVSG1000 user manual, chapter "Disposal".
Labeling in line with directive 2006/66/EC for disposal of batteries after they have come to the
end of their service life.
For more information, see "Batteries" on page 390.
For more information, see the R&S EVSG1000 user manual, chapter "Disposal".
1.1.3 Warning Messages in the Documentation
A warning message points out a risk or danger that you need to be aware of. The sig-
nal word indicates the severity of the safety hazard and how likely it will occur if you do
not follow the safety precautions.
Safety Information