Remote Control
R&S
®
ESRP
883
User Manual 1175.7445.02 ─ 08
Parameters:
<Name>
Generator name | NONE
*RST:
NONE
Example:
SYST:COMM:RDEV:GEN2:TYPE 'SME02'
Selects SME02 as generator 2
Mode:
A, NF
Manual operation:
See
11.8
Common Commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters. Many
common commands are related to the Status Reporting System.
Available common commands:
*CAL?
Calibration query
Initiates a calibration of the instrument and subsequently queries the calibration status.
Responses > 0 indicate errors.
Note:
If you start a self-alignment remotely, then select the "Local" softkey while the
alignment is still running, the instrument only returns to the manual operation state
after the alignment is completed.
Usage:
Query only
Manual operation:
See
Common Commands
