Rohde & Schwarz CMW500 Series, Руководство пользователя

Страница: 84 / 291

Basic Instrument Functions
R&S
®
CMW500
84 User Manual 1173.9463.02 ─ 02
Factory Default
Reset the instrument settings made in previous sessions, load factory default settings
(see
Reset Dialog ). This softkey affects all firmware applications of the R&S CMW500.
Continue / Wait
Resume or interrupt the startup procedure. "Wait" is appropriate e.g. for a check of the
installed hardware and software options; see "Progress Info / Detailed Info" below.
Progress / Detailed
Toggles between alternative information types in the "Option/progress information" panel
across the bottom of the screen.
●
The "Progress Info" is a log of the startup procedure including the loaded software
components.
●
The "Detailed Info" describes the selected hardware or software option. It may contain
the name, version, product code and essential technical data of the option.
It is preferable to press "Continue / Wait" in order to view the "Detailed Info". After the
startup procedure is finished and the startup dialog is closed, the detailed option infor-
mation is displayed in the
Setup Dialog .
Abort
Aborts the startup procedure. The R&S CMW500 returns to standby state. Press the
standby key on the front panel to re-initialize the startup. See also
Standby and Ready
State .
5.2 Utility Dialogs
Utility dialogs are used to perform administrative tasks and to reset the instrument to a
definite state. They also provide information on the instrument and assistance.
Most of the utility dialogs are opened using the Utility Keys to the left of the display or
alternatively via the keys of the soft-front panel, see Using the Soft-Front Panel and Key-
board Shortcuts .
Utility dialogs are the dialogs listed below and the setup dialog (see Setup Dialog ).
● Reset Dialog ............................................................................................................84
● Save/Recall Dialog ..................................................................................................86
● Print Dialog ..............................................................................................................88
● Info Dialog ...............................................................................................................89
5.2.1 Reset Dialog
The "Reset" dialog forces the instrument to return to a definite reset/preset state.
To open the dialog press RESET.
Utility Dialogs