Command Reference
R&S
®
CMW-B400B/-B405A
88
User Manual 1176.8116.02 ─ 04
SOURce:AUDio:GEN<i>:ANALog:MULTitone:TDEFinition
{<Frequency>,
<Level>}...
Configures the frequency and level of the first n tones of the multitone list of the analog
generator (n = 1 to 20). Send a parameter pair for each tone to be configured:
{<Frequency>, <Level>}
1
, ..., {<Frequency>, <Level>}
n
A query always returns the complete multitone list (20 pairs of values).
Parameters:
<Frequency>
Frequency of the tone. All tones must have different frequencies.
Range:
0 Hz to 21E+3 Hz
Default unit: Hz
<Level>
Level of the tone.
For method SEP, the level can be set and queried.
For method TLEV, the level of a setting command is ignored and
a query returns the level resulting from the total multitone signal
level.
For method selection see
The total level of the multitone signal must not exceed 5 V.
Range:
0 V to 5 V
*RST:
0.05 V
Default unit: V
Example:
See
Firmware/Software:
V3.2.10
Manual operation:
See
SOURce:AUDio:GEN<i>:DIGital:MULTitone:TDEFinition
{<Frequency>, <Level>}...
Configures the frequency and level of the first n tones of the multitone list of the digital
generator (n = 1 to 20). Send a parameter pair for each tone to be configured:
{<Frequency>, <Level>}
1
, ..., {<Frequency>, <Level>}
n
A query always returns the complete multitone list (20 pairs of values).
Parameters:
<Frequency>
Frequency of the tone. All tones must have different frequencies.
Range:
0 Hz to 21E+3 Hz
Default unit: Hz
Audio Generators
深圳德标仪器
