Rohde & Schwarz 3560.6550.11, Руководство пользователя

Страница: 17 / 31

Preparing for use
R&S
®
ENV216
17 User Manual 5201.6693.14 ─ 05
The device is not equipped with an ON / OFF switch. Instead, the device plug of the
connecting cable serves for disconnection from the AC supply (see
"Connecting to
power" on page 5).
1.
DANGER! Risk of electric shock. Before you connect the V-network to the power
source, you have to connect the R&S ENV216 to a protective ground terminal. An
unearthed R&S ENV216 is live. Touching a live electrical device causes serious
personal injury, or even death.
The protective ground connection must remain until you have disconnected the V-
network from the power supply.
Connect the R&S
ENV216 to the mains power supply.
2. If the phase connection is made correctly, LED L1 (1) must light up.
If it does not:
● For mains plugs with symmetrical grounding connection (e.g. Schuko plugs)
the plug's polarity must be reversed.
● For mains plugs with asymmetrical grounding connection, phase L1 and neutral
N must be swapped by reconnecting.
● For country-specific sockets, see Chapter A, "Country-specific Connector Mod-
els" , on page 30.
The plug on the mains cable can be adapted using a country-specific adapter.
However, it must be ensured that the adapter has a power rating of at least 16 A.
Assembly must be carried out exclusively by qualified technicians.
Connecting to power