Interfaces and Connectors
R&S
®
SFE100
19
Getting Started 2112.4122.62 ─ 13
●
LED yellow: R&S
SFE100 is remote controlled.
5.1.3 Cursor Keys
Only provided by the models 02 and 03.
UPARROW/DNARROW keys:
●
In a list in editing mode, increases or decreases the parameter value.
●
In a list, table, window or dialog box, scrolls vertically to select a parameter.
LEFTARROW/RIGHTARROW keys:
●
In editing mode, moves the cursor in the input fields forward and back.
●
In a list, table, window or dialog box, scrolls horizontally to select a parameter.
For further details see user manual or the help system.
5.1.4 Display
Only provided by the models 02 and 03.
For details on using the front panel display see the user manual or the help system.
For information on the graphical user interface see the user manual or the help system.
5.1.5 RF OUT
N (50R mechanics) connector. Used to output the RF signal.
The level range can be extended upwards by installing the power amplifier option
(R&S
SFE100-B90). With this option installed, the output is located on the rear panel.
Do not overload the RF output
See the data sheet for the limits for the DC voltage and reverse RF power. Do not
exceed these limits. Exceeding these limits can cause instrument damage.
Front Panel
