Rohde & Schwarz 1440.8002.02, Начало работы

Страница: 39 / 95

Instrument tour
R&S
®
SMM100A
39 Getting Started 1179.1335.02 ─ 04
1 = System drive (HDD), page 41
2 = AC power supply connector and switch, page 41
3 = USB/USB Device, page 41
4 = LAN, page 41
5, 6 = Display Port, HDMI, page 41
1 2 3 4
8 7 6
5
Figure 4-6: Instrument board R&S SMM-B9
1 = Dig I/Q, page 41
2 = HS Dig I/Q, page 42
3 = Adv Data/Ctrl, page 43
4 = T/M/C, page 42
5 = Board designation (CODER)
6 =
I/Q, I/Q Bar, page 43
7 = Mod Ext 1/2, page 42
8 = Adv. Trg., Adv. Clk., page 43
4.2.1 Connectors
I/Q
Rear panel I/Q input connectors for use of the instrument in a 19" rack. See "I/Q"
on page 35.
How to:
Chapter 3.4.2, "Mounting the R&S SMM100A in a rack" , on page 18
RF
Rear panel RF output connectors for use of the instrument in a 19" rack. See
"RF" on page 35.
How to:
●
Chapter 3.4.2, "Mounting the R&S SMM100A in a rack" , on page 18
●
Chapter 3.9, "Connecting to RF" , on page 22
Ref In/Ref Out
Input/output for external reference signal.
Rear panel tour