Rohde & Schwarz 1332.4500.22, Руководство пользователя

Страница: 594 / 1476

GUI Reference
R&S
®
ZNA
594 User Manual 1178.6462.02 ─ 12
For background information, see Chapter 5.1.2, "Recall Sets" , on page 65.
6.15.1.1 Basic Recall Set Functions
To create a recall set based on the current analyzer configuration, select Save . To
open an existing recall set, select Open Recall... . To create an additional setup, select
New .
The R&S ZNA supports two recall set file formats
●
znxml
(default)
XML based file format, introduced with the R&S ZNA
●
znx
Binary file format, originating from the R&S ZNB
New
Adds a new setup. The default names for new setups are "Set1", "Set2" etc. Recall
sets are accessible via tabs in the diagram area:
Tip: To open an existing recall set, use "Open Recall...". To rename a setup, use
"Save..."
Remote command:
MEMory:DEFine
Open Recall...
Loads a recall set from a file (
*.znxml|*.znx
).
File Print Softtool