Rohde & Schwarz 1332.4500.22, Руководство пользователя

Страница: 549 / 1476

GUI Reference
R&S
®
ZNA
549 User Manual 1178.6462.02 ─ 12
Source Coherence On
Same as Source Coh. On on the "Source Coherence" softtool tab.
Use Port Match and Calibration
Allows you to select between a raw (unchecked), or an optimized phase control, apply-
ing port match corrections and.calibration (checked, default).
If checked, the phase values are relative to a common zero. Otherwise the phase rela-
tion between the different ports is indetermined.
Remote command:
SOURce<Ch>:CMODe:OPTimized[:STATe]
Defined Phase Coherence Control (table)
The controls in the table allow you to activate and define port specific phase settings.
The table is enabled, if True Differential Mode is unchecked. The settings only take
effect if Source Coherence On is checked.
Def'd Phase Coherence ← Defined Phase Coherence Control (table)
Defines the individual analyzer sources as coherent or non-coherent.
Remote command:
SOURce<Ch>:CMODe:PORT<Pt>[:STATe]
Phase ← Defined Phase Coherence Control (table)
Phase at the calibratied reference plane of the related port.
Remote command:
SOURce<Ch>:CMODe:PORT<Pt>:PHASe
on page 1217
Mode Softtool