3
Figure 1
INSTALLING THE STEREO 100 INTO YOUR SYSTEM
Connecting the Stereo 100 to the Loudspeakers:
The Stereo 100 provides binding posts for both 4 and 8 ohm speakers. The
impedance selected will depend on the speakers used. Consult either the owner’s
manual for your speaker or your local dealer to determine the correct choice. For
6 ohm speakers try both and see which one you prefer.
The binding posts are high quality 5 way posts that permit the use of spades, lugs,
bare wire or banana plugs.
CAUTION – Do not operate the amplifier unless it is connected to a
loudspeaker.
