6
Set the Height
2.
3.
4.
Re-position
Pedalboard
& Beater
For larger bass drums
22” - 30”, you can raise
the upper Axle Assembly as
desired to center the Beaterʼs
strike on the drumhead.
1. Loosen the vertical shaft
Wing Nut as shown.
2. Raise the Upper
Axle Assembly by the
chrome cylinder of
the body. Tighten the
Wing Nut securely at
the desired height.
3. With the Drum Key,
loosen the Axle Release
Screw as shown to return
the Pedalboard to your
preferred playing position,
then be sure to tighten the
Axle Release Screw securely
(IMPORTANT).
4. Use the Drum Key to
loosen the Beater Angle
Screw as shown to return
the Beater to your preferred
playing angle, then be sure
to tighten the Beater Angle
Screw securely.
1.