6
1
2
User Instructions
Note: Only change lockout plates when sled is not in use.
The part shown in shaded grey in this figure is the Lock Plate Retainer. The retainer allows tool-less
operation of the Lockout Plates for customized drills with the Tek Sled. Installed as shown, with both plates
behind the retainer, the Tek Sled is free to move in all directions.
Operating the Lockout Plates
Note: Failure to snap the retainer in place between the two Lockout Plates could result in the plates
disengaging or damage to the plates.
The Lockout Plates slide forward and backward on 3 slide bolts. To engage the first Lockout Plate (to
restrict the Tek Sled to up & down movement only), remove the Lock Plate Retainer, slide the first plate
forward, and snap the retainer in place between the two Lockout Plates.
2 plates in back = free motion
1 plate in front = up &
down motion only.