Roger PS15v24, Руководство пользователя

Страница: 2 / 12

PS15v24 v3.2 EN Rev.C.doc 2007-10-23
2
I
NSTALLATION
PS15v24 should be mounted on wall or another surface using four screws, it may be
installed in vertical or horizontal position. Power supply should be installed far enough
from heat and moisture sources. All electrical connection should be carried out with AC
supply off. The PS15v24 will not start operation on reserve battery, the AC supply must
exists in order to begin PS activity. The AC supply cable should be guided into PS’s case
using dedicated hole protected with dielectric sleeve and then firmly fixed to
230VAC
input terminals (see installation diagram). Do not adjust potentiometers located on
PS15v24 electronic board, these components are factory set and should not be changed.
Warning
The high voltage exists on some device elements, prior to servicing the AC supply must
be switched off.
T
ECHNICAL
S
PECIFICATION
Parameter Value Comments
AC supply 230 VAC RMS value
AC frequency 50..60 Hz
Nominal
Output voltage
27.6 VDC
Output voltage may vary from app. 23.0
up to 27.6V depending on actual battery
charging phase.
Max. output current
(without battery)
1,5A
Maximum output current is guaranteed for
unlimited time and for entire temp. range.
During battery charging process output
current will be reduced to 1200mA
Ambient Temperature 0..55 °C
Max. momentary
output current with
battery
5,5A
1.5A delivered by electronic circuit and
4.0A delivered by battery
Initial battery charging
current
0.3A
Battery cut off voltage 20.0V
Battery compartment 2 x 6.5Ah/12V Two batteries 6.5Ah/12V
Dimensions 269x168x120
Weight 2,65 kg Without battery
The symbol of a crossed-through waste bin on wheels means that the product
must be disposed of at a separate collection point. This also applies to the
product and all accessories marked with this symbol. Products labeled as such
must not be disposed of with normal household waste, but should be taken to a
collection point for recycling electrical and electronic equipment. Recycling helps to reduce
the consumption of raw materials, thus protecting the environment.