Roger PRT12MF-DES, Руководство по эксплуатации

Страница: 3 / 23

PRT12MF-DES PRT82MF PRT84MF Operating Manual.doc 2018-08-23
3/23
1. G
ENERAL DESCRIPTION
1.1 Introduction
PRT12MF-DES, PRT82MF and PRT84MF readers are designed to work with access controllers which
support RACS CLK/DTA or Wiegand 24..66 bit data output formats. Readers cannot be operated as
standalone devices and they are dedicated to read and transmit card number or PIN to access
controller. Contrary to other PRTxxMF series readers, PRT12MF-DES readers can also read the most
secure MIFARE DESFire and MIFARE Plus card in full range (both CSN and PCN). The factory new
reader is pre-configured with RACS CLK/DTA operating mode and ID=0 address. The mode can be
changed from PC (RogerVDM) or within the procedure of manual programming of operating mode.
1.2 Features
 ISO14443A RFID proximity cards:
o
MIFARE® ULTRALIGHT
o
MIFARE® Classic 1k and 4k
o
MIFARE® DESFire EV0 and EV1 (PRT12MF-DES only)
o
MIFARE® Plus (PRT12MF-DES only)
 CSN and PCN reading
 RACS CLK/DTA output format
 Wiegand 26..66 bit output format
 Three LED indicators
 LEDs controlled by inputs (Wiegand mode)
 Buzzer with adjustable loudness
 Buzzer controlled by input (Wiegand mode)
 Adjustable keypad backlight
 Two function keys (PRT12MF-DES)
 Tamper contact
 Programming from PC (RogerVDM software)

0.5m connection cable
 Outdoor use
 CE Mark
1.3 Card number
RCN (Returned Card Number) which is transmitted by reader to access controller consists of two
sections corresponding to two numbers stored on MIFARE card i.e. read only CSN (Chip Serial
Number) and custom PCN (Programmed Card Number). It is not obligatory to use both numbers for
the composition of RCN as it can include only CSN section or only PCN section.
When the system is configured for the operation with RCN number which includes PCN section then
cards from other systems will not be recognized. Cards with PCN must be earlier programmed by
administrator of the system. It can be done with any card writer e.g. RUD-3 and RUD-4 devices and
with RogerVDM software. By default PRT readers are configured for the reading of RCN with only
CSN section (RCN=CSN).
Note: Encrypted PCN is protected against modifications and unauthorized reading. It is
recommended to apply PCN in systems that require high security.
Any PRT reader must be configured with the same parameters as card writer used to program
cards. The definition of RCN explains how the resulting card number is created from CSN and PCN
sections of the card.
RCN
CSN section PCN section