Fitting Guide | Roger and Cochlear sound processors Nucleus 5 and Nucleus 6 4
Special features for educational system
4
Programming of EasyGain
If the volume of the Roger system is not satisfactory, you can
change the gain of the Roger receiver
4
via Roger inspiro. Hold
Roger inspiro close to Roger receiver (less than 10 cm/4 inches)
and press
Check
. Roger receiver information will appear on the
inspiro’s screen.
Press
Manage
, scroll with the cursor to
EasyGain
and press
OK
.
Now you can change the gain of the receiver in the range of -8
to +8 dB.
NOTE: Deactivation of the audio input is possible by using the Cochlear remote control.
4
Available for Roger 14 (02) and Roger X (02) only.
V1.
00/
2014
-0
2/
©
Ph
on
ak
A
G
A
ll r
igh
ts
re
se
rv
ed
