TECHNICAL SPECIFICATION
The audio signal path is completely Class A with a very high bandwidth. The -3dB
point has been set to above 100Khz. The low end extends to below 10Hz.
Peaks are accurately high speed manipulated with ease and maintain the original
phase position in the waveform. This fact can be observed using the latest high speed
storage oscilloscope technology.
This is a completely discrete analogue design hand built using only selected low noise
transistors, low noise metal film 1% resistors, plastic film capacitors from the World’s
top manufacturers all combined in a design to provide ultimate studio quality audio.
Gold Plated Neutrik XLR connectors are used, LED Status Indication and Custom
Conductive Plastic 22 way Stepped Potentiometers manufactured for best tracking
accuracy.
A 6 layer multi layer PC Card provides full shielding for all circuit traces with the
Ground and Power Planes all contributing to outstanding high frequency phase
performance and stability. The enclosure manufactured from stainless steel completes
the 3 faraday cage triple shielding design necessary in today’s RF congested
environment.
The 48V DC input power is further regulated and filtered onboard to provide virtual
battery performance and the lowest possible noise under all conditions.
Microphone Input Sensitivity:
-75dBV to -10dBV
Line Input Level:
N4dBu Balanced
Line Input Impedance:
10K
Operating Output Level:
N4dBu Balanced
Output Level Noise (LINE):
-118dBu
Output Impedance:
100ohms Balanced
Output Load Impedance:
10K or greater
456HD® Dynamic Range
:
96dB
Headroom:
Maximum Line Input level +35dBm – Internal Headroom 25dB
Size:
Standard 2U Rack Size – 483 x 90 x 250mm (19 x 3.5. x 10in).
Weight:
4.0Kg
Power Requirements:
+48V DC regulated
Universal World AC / DC Switching Adaptor Supplied
www.roger-mayer.co.uk
